The optimization of hydrothermal process of MoS_2 nanosheets and their good microwave absorption performances

In this study,flower-like MoS_2 constructed by nanosheets was synthesized by a simple hydrothermal method.The hydrothermal process was optimized and the effects of hydrothermal condition,including reaction temperature,reaction time and the ratio of Mo source to S source(Mo:S) in precursor,on microwave absorption performances and dielectric properties were investigated.Our results showed that when the reaction temperature was 180℃,the reaction time was 18 h,and the Mo:S was 1:3.5,the synthesized MoS_2 had the best performance:Its minimum reflection loss could reach-55.78 dB,and the corresponding matching thickness was 2.30 mm with a wide effective bandwidth of 5.17 GHz.Further researches on the microwave absorption mechanism revealed that in addition to the destructive interference of electromagnetic waves,various polarization phenomena such as defect dipole polarization were the main reasons for microwave loss.We believe that MoS_2 is a candidate for a practical microwave absorbent.     

Visible‐light photocatalytic activity of Ag@MIL‐125(Ti) microspheres

Ag nanoparticle (NP)‐decorated MIL‐125(Ti) microspheres (Ag@MIL‐125(Ti)) were firstly fabricated via a facile hydrothermal and following photo‐reduction method. The photocatalysts were characterized using X‐ray diffraction, scanning and transmission electron microscopies, X‐ray photoelectron spectroscopy and UV–visible diffuse reflectance spectroscopy. The characterization results indicated that Ag NPs were dispersed on the surface of MIL‐125(Ti) microspheres, and the Ag NPs had a uniform diameter of about 40 nm. The composites exhibited excellent visible‐light absorption, due to the modification with the Ag NPs. The photocatalytic activity for the visible‐light‐promoted degradation of Rhodamine B was improved through the optimization of the amount of Ag loaded as a co‐catalyst, this amount being determined as 3 wt%. Additionally, studies performed using radical scavengers indicated that O₂^? and e^? served as the main reactive species. The catalyst can be reused at least five times without significant loss of its catalytic activity. Furthermore, a photocatalytic mechanism for degradation of organics over Ag@MIL‐125(Ti) is also proposed. Copyright © 2015 John Wiley & Sons, Ltd.     

水热法制备二氧化钛微球的形貌控制及机理研究

以钛粉、Na OH和H2O2为原料,采用水热法成功制备出二氧化钛微球。利用X-射线粉末衍射仪(XRD)、扫描电子显微镜(SEM)和场发射扫描电镜(FESEM)对产物的结构、形貌和尺度进行了表征。结果表明,产物为金红石型Ti O2,微球的直径约为1~2μm,微球由许多纳米管组成。根据实验结果,讨论了二氧化钛纳米管的生长机理,初步研究了双氧水用量,水热温度以及煅烧温度等对产物形貌形成的影响。     

铜基/氧化锆催化剂的应用及改性研究进展

ZrO2具有弱酸碱性、氧化还原性、良好的热稳定性和机械强度,在催化领域得到广泛应用。以Zr O2为载体的铜基催化剂因其活性高,选择性好,性能稳定,受到越来越多的关注。本文介绍了Cu/Zr O2催化剂在醇类的水蒸气重整制氢、CO/CO2加氢合成低碳醇、二乙醇胺脱氢、乙醇直接合成乙酸乙酯和低温水煤气变换方面的应用。综述了添加不同助剂对Cu/Zr O2催化剂物化及催化性能的影响。     

Carbon Materials for Lithium Sulfur Batteries—Ten Critical Questions

Lithium–sulfur batteries are among the most promising electrochemical energy storage devices of the near future. Especially the low price and abundant availability of sulfur as the cathode material and the high theoretical capacity in comparison to state‐of‐the art lithium‐ion technologies are attractive features. Despite significant research achievements that have been made over the last years, fundamental (electro‐) chemical questions still remain unanswered. This review addresses ten crucial questions associated with lithium–sulfur batteries and critically evaluates current research with respect to them. The sulfur–carbon composite cathode is a particular focus, but its complex interplay with other hardware components in the cell, such as the electrolyte and the anode, necessitates a critical discussion of other cell components. Modern in situ characterisation methods are ideally suited to illuminate the role of each component. This article does not pretend to summarise all recently published data, but instead is a critical overview over lithium–sulfur batteries based on recent research findings.     

锡苯和铅苯二聚反应的理论研究

采用密度泛函理论B3LYP方法,研究了锡苯和铅苯的[2+2],[4+2]及[4+4]二聚反应的微观机理和势能剖面,考察了Sn(Pb)原子上的2,4,6-三甲基苯基(Mes)取代基对反应势能剖面的影响.研究结果表明,所有反应均为协同过程,且大多数情况下,2个C—Sn(Pb)键同步形成.[2+2]和[4+2]反应在热力学和动力学上均比相应的[4+4]反应容易进行,而[4+2]反应在动力学上比相应的[2+2]反应有利.Sn(Pb)原子上的Mes取代基在热力学和动力学上均不利于反应的进行.铅苯的动力学稳定性与锡苯相当,但其热力学稳定性高于锡苯.     

Molecular‐Level Insights into Intrinsic Peroxidase‐Like Activity of Nanocarbon Oxides

Nanocarbon oxides have been proved to possess great peroxidase‐like activity, catalyzing the oxidation of many peroxidase substrates, such as 3,3′,5,5′‐tetramethylbenzidine (TMB) and o‐phenylenediamine dihydrochloride (OPD), accompanied by a significant color change. This chromogenic reaction is widely used to detect glucose and occult blood. The chromogenic reaction was intensively investigated with density functional theory and molecular‐level insights into the nature of peroxidase‐like activity were gained. A radical mechanism was unraveled and the carboxyl groups of nanocarbon oxides were identified as the reactive sites. Aromatic domains connected with the carboxyl groups were critical to the peroxidase‐like activity.     

Voltammetric study of the behaviour of N-acetyl-p-aminophenol in aqueous solutions at a platinum electrode

The electrochemical oxidation of N-acetyl-p-aminophenol (PAR) was investigated at a Pt electrode with the application of cyclic (CV) and differential pulse (DPV) voltammetry methods. An effect of scan rate, substrate concentration and pH on electrode reactions was determined. The parameters of substrate electro-oxidation, i.e. heterogeneous rate constant, charge transfer coefficient, and diffusion coefficient, were calculated. Our investigation's results prove the exchange of two electrons and one proton in the first step, followed by a chemical reaction. PAR electro-oxidation occurs according to an EC mechanism.     

Selective Growth and Structural Analysis of Regular MnO Nanooctapods Bearing Multiple High‐Index Surface Facets

Although numerous morphologies of MnO nanostructures have been reported, an exact structural analysis and mechanistic study has been lacking. In the present study, the formation of regular MnO octapods was demonstrated in a simple procedure, comprising the thermal decomposition of manganese oleate. Because of their structural uniformity, an ideal three‐dimensional model was successfully constructed. The eight arms protruded from the cubic center with tip angles of 38° and surface facets of {311} and {533} with rounded edges. The concentrations of oleate and chloride ions were the determining factors for the octapod formation. Selective coordination of the oleate ions to the {100} faces led to edge growth along the <111> direction, which was then limited by the chloride ions bound to the high‐index surface facets. These structural and mechanistic analyses should be helpful for understanding the complex nanostructures and for tuning their structure‐related properties.